SRX550 Services Gateway DC Power Cable Specifications

The DC power supply in slot 0 must be powered by dedicated power feeds derived from feed A, and the DC power supply in slot 1 must be powered by dedicated power feeds derived from feed B. This configuration provides the commonly deployed A/B feed redundancy for the system.

Caution: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled (+) and (–) to indicate their polarity. There is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply.

Warning: For field-wiring connections, use copper conductors only.

For other electrical safety information, see SRX550 Services Gateway Electrical Wiring Guidelines.

Caution: Power cords and cables must not block access to services gateway components or drape where people could trip on them.

Table 36 summarizes the specifications for the power cable(s), which you must supply.

Table 36: DC Power Cable Specifications

Cable Type

Quantity and Specification

Power

8 AWG, minimum 60°C wire, or as permitted by the local code

Related Documentation