SRX550 Services Gateway Hardware Guide
Copyright and Trademark Information- Table of Contents
-
About This Guide - SRX550 Services Gateway Overview
- Introduction to the SRX550 Services Gateway
- SRX550 Services Gateway Hardware Components
- SRX550 Services Gateway Chassis
- SRX550 Services Gateway Front Panel
- SRX550 Services Gateway Front Panel LEDs
- SRX550 Services Gateway Back Panel
- SRX550 Services Gateway Cooling System
- SRX550 Services Gateway Power Supply
- SRX550 Services Gateway Gigabit-Backplane Physical Interface
Modules
- SRX550 Services Gateway Mini-Physical Interface Modules
- SRX550 Services Gateway Power over Ethernet
-
- Setting Up the SRX550 Services Gateway
- Preparing the Site for SRX550 Services Gateway Installation
- Site Preparation Checklist for the SRX550 Services Gateway
- General Site Installation Guidelines for the SRX550 Services
Gateway
- SRX550 Services Gateway Cabinet Requirements
- SRX550 Services Gateway Rack Requirements
- Clearance Requirements for Airflow and Hardware Maintenance
of the SRX550 Services Gateway
- SRX550 Services Gateway Power Requirements
- Unpacking the SRX550 Services Gateway
- Installing the SRX550 Services Gateway
- Installation Overview for the SRX550 Services Gateway
- SRX550 Services Gateway Safety Requirements, Warnings, and
Guidelines
- Required Tools and Parts for Installing the SRX550 Services
Gateway
- Preparing the SRX550 Services Gateway for Rack-Mount Installation
- Installing the SRX550 Services Gateway in a Rack
- SRX550 Services Gateway Autoinstallation Overview
- SRX550 Services Gateway Boot Devices and Dual-Root Partitioning
Scheme
- Connecting the SRX550 Services Gateway
- Grounding, Powering On, and Powering Off the SRX550 Services
Gateway
- Establishing Basic Connectivity for the SRX550 Services Gateway
- SRX550 Services Gateway Basic Connectivity
- Connecting to the SRX550 Services Gateway
- Connecting to the SRX550 Services Gateway from the J-Web Interface
- Connecting to the SRX550 Services Gateway from the CLI Locally
- Connecting to the SRX550 Services Gateway from the CLI with
the USB Console Port
- Connecting to the SRX550 Services Gateway from the CLI Remotely
- Configuring the Modem at the SRX550 Services Gateway End
- Connecting the Modem to the Console Port on the SRX550 Services
Gateway
- Connecting the CLI at the User End for the SRX550 Services
Gateway
- Configuring Basic Settings for the SRX550 Services Gateway
with a Configuration Editor
- Displaying Basic Connectivity Configurations for the SRX550
Services Gateway
- SRX550 Services Gateway Secure Web Access Overview
-
-
- SRX550 Services Gateway Hardware Maintenance, Replacement,
and Troubleshooting Procedures
- Appendixes
- Safety and Regulatory Compliance Information
- SRX550 Services Gateway Definition of Safety Warning Levels
- SRX550 Services Gateway General Safety Guidelines and Warnings
- Restricted Access Area Warning
- Preventing Electrostatic Discharge Damage to the SRX550 Services
Gateway
- SRX550 Services Gateway Fire Safety Requirements and Fire Suppression
Equipment
- SRX550 Services Gateway Installation Safety Guidelines and
Warnings
- SRX550 Services Gateway Laser and LED Safety Guidelines and
Warnings
- SRX550 Services Gateway Maintenance and Operational Safety
Guidelines and Warnings
- SRX550 Services Gateway Electrical Safety Guidelines and Warnings
- SRX550 Services Gateway Agency Approvals
- SRX550 Services Gateway Compliance Statements for NEBS
- SRX550 Services Gateway Compliance Statements for EMC Requirements
- SRX550 Services Gateway Compliance Statements for Environmental
Requirements
- SRX550 Services Gateway Acoustic Noise Compliance Statements
- SRX550 Services Gateway Environmental Specifications
- SRX550 Services Gateway Power Guidelines, Requirements, and
Specifications
- Contacting Customer Support and Returning the SRX550 Services
Gateway Hardware
- SRX550 Services Gateway Interface Cable Specifications and
Connector Pinouts
-
- Index
Symbols
A
- AC input
- AC power
- AC power cord
- AC power safety guidelines
- AC power supply
- AC system current rating
- accident procedures, electrical
- acoustic noise compliance statement
- agency approvals
- agency label, chassis
- air filter 1
- airflow
- altitude, acceptable range
- autoinstallation, overview
- automatic configuration
B
- back panel
- backplane 1, 2
- backup device
- basic connectivity
- battery-handling warning
- boot devices, dual-root partitioning
- braces, in configuration statements
- brackets
- built-in Ethernet ports, connecting
C
- cabinet requirements
- cabinet size requirements
- cables, connecting Ethernet
- chassis
- class 1 laser warning
- class 1 LED warning
- clearance
- clearance for cabinet
- CLI
- command-line interface See CLI
- comments, in configuration statements
- compliance statement, acoustic noise
- compliance statements, EMC requirements
- component details, listing with the CLI
- components, packing for shipment
- configuration editor, establishing basic connectivity
- configuration, required equipment for
- connecting
- connectivity
- console cable connector
- console port
- control port
- conventions
- cooling system
- cords, AC power supply
- curly braces, in configuration statements
- customer support, contacting
D
E
- earthquakes, tested toleration for shock
- electrical
- electrostatic discharge 1, 2
- EMC
- EMC requirements
- environmental requirements, lithium battery
- environmental specifications
- ESD See electrostatic discharge
- Ethernet cable, connecting services gateway to management device with
- Ethernet ports, built-in
F
G
H
- height, of chassis
- hot-swappable
- humidity (relative), acceptable
I
J
- J-Web setup wizard, configuring services gateway
- J-Web setup wizard, establishing basic connectivity
- J-Web, connecting services gateway
- jewelry removal warning
- JTAC
- Juniper Technical Assistance Center See JTAC
- Junos OS
L
M
N
O
P
- packing services gateway
- parentheses, in syntax descriptions
- partitioning, services gateway
- parts
- required for packing
- verifying received 1, 2
- Physical Interface Module See GPIMs
- physical specifications, chassis
- plug types 1, 2
- PoE
- port settings
- power
- requirements
- safety guidelines, AC
- specifications 1, 2
- POWER LED
- Power over Ethernet See PoE
- power supply 1
- power-up reset
- powering off services gateway
- powering on services gateway
- preparing for rack-mount installation
- preparing site for installation
- preventing ESD damage
- product disposal warning
R
- rack
- rack requirements
- radiation from open port apertures warning
- radio frequency interference See RFI
- relative humidity, acceptable
- removing
- removing DC power supply
- removing DC power supply cable
- repair policies
- RESET CONFIG button
- resetting services gateway 1
- restricted access area warning
- return materials authorization See RMA
- return procedure
- RFI
- RMA
S
- safety guidelines, laser
- safety requirements
- seismic (earthquake), tested level
- serial number label, chassis
- serial number label, GPIM
- services gateway
- shipment
- show chassis hardware command
- shutting down services gateway 1
- signaling limitations
- site, environmental specifications
- specifications, environmental
- SSH, connecting to services gateway
- STATUS LED 1, 2
- support, requesting from JTAC 1, 2
- surge protector 1, 2
- syntax conventions
- system time
T
U
- unpacking
V
W
X
