SRX3600 Services Gateway 2-Port XFP 10-Gigabit Ethernet IOCs
The SRX3K-2XGE-XFP adds two ports for 10-Gigabit Ethernet traffic from fiber interface media. It is inserted horizontally into the midplane of the services gateway to communicate with the Switch Fabric Board (SFB) and to receive power. To use fiber interface media, install 10-Gigabit small form-factor pluggable (XFP) transceivers on the desired ports. LEDs on the faceplate of the IOC indicate port status and connectivity (see Table 15). Ports are numbered from left to right, 0-1. The ONLINE button does not perform any function. To power up and power down an IOC, you must use the main Power button on the front panel of the SFB. See Figure 12.
Figure 12: 2-Port XFP 10-Gigabit Ethernet IOC

Table 15: LED Indicators
Label | Color | Status | Indicated Behavior |
---|---|---|---|
SERVICE | Green | On steadily | The IOC is mapped to the NPC and is available to carry Ethernet traffic. |
Amber | On steadily | The IOC is not mapped to the NPC and is not available to carry Ethernet traffic. | |
Dark (unlit) | Off | The IOC is administratively disabled, but mapped to the NPC. | |
OK/FAIL | Green | On steadily | The IOC is operating normally. |
Green | Blinking | The IOC is preparing for hot-plug event:
| |
Red | On steadily | The IOC has failed and is not operating normally. | |
Dark (unlit) | Off | The IOC is offline and can be safely removed. |