Connecting the SRX3600 Services Gateway to a Management Console or an Auxiliary Device

To use a system console to configure and manage the Routing Engine, connect it to the RE0 CONSOLE port on the Switch Fabric Board (SFB) using the RJ-45 cable.

To connect a management console or an auxiliary device:

1. Turn off the power to the console.
2. Plug the RJ-45 end of the cable (Figure 42 shows the connector) into the RE CONSOLE 0 port on the SFB.
3. Plug the female DB-9 end into the device's serial port.

   Figure 41: Connecting to the Console Port

   

Figure 42: Console and Auxiliary Cable Connector

Related Documentation

• Required Tools and Parts for Connecting the SRX3600 Services Gateway
• Connecting the SRX3600 Services Gateway to a Network for Out-of-Band Management
• Grounding the SRX3600 Services Gateway
• Console Port Cable and Wire Specifications for the SRX3600 Services Gateway
• SRX3600 Services Gateway Switch Fabric Board