Connecting the SRX3400 Services Gateway to a Management Console or an Auxiliary Device

To use a system console to configure and manage the Routing Engine, connect it to one of the RE CONSOLE ports on the Switch Fabric Board (SFB) using the RJ-45 cable.

To connect a management console or an auxiliary device:

  1. Turn off the power to the console.
  2. Plug the RJ-45 end of the cable (Figure 42 shows the connector) into the RE CONSOLE 0 port on the SFB.
  3. Plug the female DB-9 end into the device's serial port.

    Figure 41: Connecting to the Console Port

    Image g036011.gif

Figure 42: Console and Auxiliary Cable Connector

Image g003781.gif

Related Documentation