Connecting the SRX3400 Services Gateway to a Network for Out-of-Band Management

To connect the Routing Engine to a network for out-of-band management:

  1. Turn off the power to the management device.
  2. Plug one end of an Ethernet cable with RJ-45 connectors (Figure 40 shows the connector) into the RE ETHERNET 0 port on the front of the Switch Fabric Board (SFB).

    Figure 40: SFB Ethernet Cable Connector

    Image g001063.gif

    One Ethernet cable is provided with the services gateway.

  3. Plug the other end of the cable into the network device.

Related Documentation