Troubleshooting with LEDs on the SRX3400 Services Gateway

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

LEDs on the Services Gateway display the status of various components:

IOC LED—One LED labeled OK/FAIL on each IOC faceplate indicates the IOC's status. See Table 13.
SPC LED—One LED labeled OK/FAIL on each SPC faceplate indicates the SPC's status. See Table 12.
NPC LED—One LED labeled OK/FAIL on each NPC faceplate indicates the NPC's status. See Table 11.
SFB LEDs—Ten LEDs, labeled ALARM, SFB, HA, SERVICE, OK/FAIL, RE0, RE1, PWR, and FAN, on the SFB faceplate indicate the status of the SFB. If no LEDs are lit, the RE may still be booting or the SFB is not receiving power. See Table 9.
RE LEDs—Five LEDs, labeled MASTER, HDD, STATUS for the RE function, STATUS for the PFE controller, and OK/FAIL for general board status, on the Routing Engine faceplate indicate the status of the Routing Engine and hard disk drive. See Table 15.
Power supply LEDs—One LED on each power supply faceplate indicates the status of that power supply. See Table 19 or Table 21.