[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Installation Overview for the SRX3400 Services Gateway

After you have prepared your installation site as described in Site Preparation Checklist for the SRX3400 Services Gateway, you are ready to unpack and install the Services Gateway. It is important to proceed through the installation process in the following order:

  1. Review the safety guidelines explained in SRX3400 Services Gateway Definition of Safety Warning Levels.
  2. Install the Services Gateway as described in Preparing the SRX3400 Services Gateway for Rack-Mount or Cabinet Installation.
  3. Connect cables to external devices as described in Connecting the SRX3400 Services Gateway to a Management Console or an Auxiliary Device or Connecting the SRX3400 Services Gateway to a Network for Out-of-Band Management.
  4. Connect the grounding cable as described in Grounding the SRX3400 Services Gateway.
  5. Connect the power cables as described in Connecting the SRX3400 Services Gateway to a DC Power Supply or Connecting the SRX3400 Services Gateway to an AC Power Supply.
  6. Power on the Services Gateway as described in Powering On the SRX3400 Services Gateway.
  7. Perform the initial system startup as described in Performing Initial Software Configuration on the SRX3400 Services Gateway.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]