Connecting the SRX3400 Services Gateway to a Network for Out-of-Band Management

To connect the Routing Engine to a network for out-of-band management:

1. Turn off the power to the management device.
2. Plug one end of an Ethernet cable with RJ-45 connectors (Figure 36 shows the connector) into the appropriate RE ETHERNET port on the front of the Switch Fabric Board (SFB):
   • The port labeled RE ETHERNET 0 connects to the Routing Engine when it is installed in slot RE0,
   • The port labeled RE ETHERNET 1 connects to the Routing Engine when it is installed in slot RE1,

   Figure 36: SFB Ethernet Cable Connector

   

   One Ethernet cable is provided with the device. The port labeled RE0 connects to the Routing Engine in the RE0 slot.

3. Plug the other end of the cable into the network device.

Related Topics

• Required Tools and Parts for Connecting the SRX3400 Services Gateway
• Connecting the SRX3400 Services Gateway to a Management Console or an Auxiliary Device
• Grounding the SRX3400 Services Gateway
• Console Port Cable and Wire Specifications for the SRX3400 Services Gateway
• SRX3400 Services Gateway Switch Fabric Board