[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

SRX3400 Services Gateway 16-Port SFP Gigabit Ethernet IOC

The SRX3K-16GE-TX switches 16 ports of standard Ethernet, Fast Ethernet, or Gigabit Ethernet traffic from a copper media. It is inserted horizontally into the midplane of the device to communicate with the Switch Fabric Board (SFB) and to receive power. The ports utilize RJ-45 connectors. LEDs on the faceplate of the IOC indicate port status and connectivity. See Figure 11 and Table 14, respectively. The ONLINE button does not perform any function. To power up and power down an IOC, you must use the main Power button on the front panel of the SFB.

Note: Juniper strongly recommends the use of Juniper transceivers. Juniper cannot guarantee correct operation if non-Juniper transceivers are used. The transceiver type can be different in each port, as long as a supported part number is used.

Figure 11: 16-Port Copper 10/100/1000 IOC

Image g036031.gif

Table 14: LED Indicators

Label

Color

Status

Indicated Behavior

SERVICE

Green

On steadily

The IOC is mapped to the NPC and is available to carry Ethernet traffic.

Amber

On steadily

The IOC is not mapped to the NPC and is not available to carry Ethernet traffic.

Dark (unlit)

Off

The IOC is administratively disabled, but mapped to the NPC.

OK/FAIL

Green

On steadily

The IOC is operating normally.

Green

Blinking

The IOC is preparing for hot-plug event:

  • Card is being Inserted: power up, booting, initialization.
  • Card is being removed: shut down by chassis management software.

Red

On steadily

The IOC has failed and is not operating normally.

Dark (unlit)

Off

The IOC is offline and can be safely removed.

Related Topics


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]