Connecting the SRX3400 Services Gateway to a Network for Out-of-Band Management

To connect the Routing Engine to a network for out-of-band management:

  1. Turn off the power to the management device.
  2. Plug one end of an Ethernet cable with RJ-45 connectors (Figure 40 shows the connector) into the RE ETHERNET 0 port on the front of the Switch Fabric Board (SFB).

    Figure 40: SFB Ethernet Cable Connector

    SFB Ethernet Cable
Connector

    One Ethernet cable is provided with the services gateway.

  3. Plug the other end of the cable into the network device.

Related Documentation