SRX3400 Services Gateway 2-Port XFP 10-Gigabit Ethernet IOCs

The SRX3K-2XGE-XFP adds two ports for 10-Gigabit Ethernet traffic from fiber interface media. It is inserted horizontally into the midplane of the services gateway to communicate with the Switch Fabric Board (SFB) and to receive power. To use fiber interface media, install 10-Gigabit small form-factor pluggable (XFP) transceivers on the desired ports. LEDs on the faceplate of the IOC indicate port status and connectivity (see Table 15). Ports are numbered from left to right, 0-1. See Figure 12.

Note: The ONLINE button on the IOC front panel does not perform any function.

Figure 12: 2-Port XFP 10-Gigabit Ethernet IOC

2-Port XFP 10-Gigabit Ethernet
IOC

Table 15: LED Indicators

Label

Color

Status

Indicated Behavior

SERVICE

Green

On steadily

The IOC is mapped to the NPC and is available to carry Ethernet traffic.

Amber

On steadily

The IOC is not mapped to the NPC and is not available to carry Ethernet traffic.

Dark (unlit)

Off

The IOC is administratively disabled, but mapped to the NPC.

OK/FAIL

Green

On steadily

The IOC is operating normally.

Green

Blinking

The IOC is preparing for hot-plug event:

  • Card is being inserted: power up, booting, initialization.
  • Card is being removed: shut down by chassis management software.

Red

On steadily

The IOC has failed and is not operating normally.

Dark (unlit)

Off

The IOC is offline and can be safely removed.

Related Documentation