Connecting and Organizing Interface Cables to the SRX240 Services Gateway

You connect the interfaces installed in the services gateway to various network media. Each type of interface on a services gateway uses a particular medium to transmit data. You must configure each network interface before it can operate on the services gateway.

To connect the interface cable to the services gateway:

  1. Have ready a length of the type of cable used by the interface.
  2. Insert the cable connector into the cable connector port on the interface faceplate.
  3. Arrange network cables as follows to prevent them from dislodging or developing stress points:
    • Secure cables so that they are not supporting their own weight as they hang to the floor.
    • Place excess cable out of the way in neatly coiled loops.
    • Use fasteners to maintain the shape of cable loops.

Related Documentation