Replacing or Installing Mini-Physical Interface Modules in the SRX240 Services Gateway

Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a services gateway for enhanced functionality as needed. They enable you to easily add or change physical interfaces on a services gateway.

The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplate to maintain efficient cooling of the services gateway. Before installing the Mini-PIM, you must remove this faceplate.

See the SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide for information about installing the Mini-PIMs.

Note: The Mini-PIMs available on the SRX240 Services Gateway are not hot-swappable. You must power off the services gateway before removing or installing Mini-PIMs.

Related Documentation