Connecting the SRX220 Services Gateway to the Power Supply

Caution: Before connecting the device to the power supply, attach an electrostatic discharge (ESD) strap to an ESD point and place the other end of the strap around your bare wrist.

To connect the device to the power supply:

  1. Plug the DC connector end of the power cable into the power connector on the back of the device (see Figure 14).
  2. Secure the DC connector end of the power cable in the power connector, using a plastic cable tie, as shown in Figure 14.
  3. Plug the AC adapter end of the power cable into an AC power outlet.

    Figure 14: Connecting the SRX220 Services Gateway to the Power Supply

    Image g037611.gif

Caution: We recommend using a surge protector for the power connection.

Related Documentation