Replacing or Installing Mini-Physical Interface Modules in the SRX220 Services Gateway

Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a device for enhanced functionality, based on your requirements. They enable you to easily add or change physical interfaces on a device.

The SRX220 Services Gateway has two Mini-PIM slots. Each slot is covered with a blank faceplate to maintain proper airflow through the services gateway. Before installing a Mini-PIM in a slot, you must remove the blank faceplate from the slot.

See the SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide for information about installing Mini-PIMs.

Note: The Mini-PIMs available for the SRX220 Services Gateway do not support hot swapping. You must power off the device and then unplug its power supply adapter before removing or installing Mini-PIMs.

Related Documentation