Table of Contents
- About This Guide
- SRX220 Services Gateway Overview
- Introduction to the SRX220 Services Gateway
- SRX220 Services Gateway Hardware Components and Specifications
- SRX220 Services Gateway Specifications
- SRX220 Services Gateway Front Panel and Back Panel Views
- SRX220 Services Gateway Built-In Interfaces
- SRX220 Services Gateway LEDs
- SRX220 Services Gateway Boot Devices and Dual-Root Partitioning Scheme
- SRX220 Services Gateway Cooling System
- SRX220 Services Gateway Power Supply
- SRX220 Services Gateway Power over Ethernet Support
- SRX220 Services Gateway Mini-Physical Interface Modules
- Setting Up the SRX220 Services Gateway
- Preparing the Site for the SRX220 Services Gateway Installation
- Site Preparation Checklist for the SRX220 Services Gateway
- General Site Guidelines for Installing the SRX220 Services Gateway
- SRX220 Services Gateway Cabinet Requirements
- SRX220 Services Gateway Rack Requirements
- Clearance Requirements for Airflow and Hardware Maintenance of the SRX220 Services Gateway
- SRX220 Services Gateway Electrical and Power Requirements
- Installation Overview for the SRX220 Services Gateway
- Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
- Unpacking the SRX220 Services Gateway
- Preparing the SRX220 Services Gateway for Installation
- Installing the SRX220 Services Gateway
- Connecting, Grounding, and Powering On the SRX220 Services Gateway
- SRX220 Services Gateway Autoinstallation
- Connecting the SRX220 Services Gateway to Management Devices
- Connecting an SRX220 Services Gateway to the J-Web Interface
- Connecting an SRX220 Services Gateway to the CLI Locally
- Connecting an SRX220 Services Gateway to the CLI Remotely
- Configuring the Modem at the SRX220 Services Gateway End
- Connecting the Modem to the Console Port on the SRX220 Services Gateway
- Connecting to the CLI at the User End for the SRX220 Services Gateway
- Performing Initial Software Configuration on the SRX220 Services Gateway
- SRX220 Services Gateway Software Configuration Overview
- Performing Initial Software Configuration on the SRX220 Services Gateway Using the CLI
- Performing Initial Software Configuration on the SRX220 Services Gateway Using the J-Web Interface Setup Wizard
- SRX220 Services Gateway Secure Web Access Overview
- Maintaining and Monitoring the SRX220 Services Gateway Hardware
- Appendixes
- Safety and Regulatory Compliance Information
- SRX220 Services Gateway Definition of Safety Warning Levels
- SRX220 Services Gateway General Safety Guidelines and Warnings
- SRX220 Services Gateway Fire Safety Requirements
- SRX220 Services Gateway Installation Safety Guidelines and Warnings
- SRX220 Services Gateway Laser and LED Safety Guidelines and Warnings
- SRX220 Services Gateway Maintenance and Operational Safety Guidelines and Warnings
- SRX220 Services Gateway Electrical Safety Guidelines and Warnings
- SRX220 Services Gateway Agency Approvals
- SRX220 Services Gateway Compliance Statements for EMC Requirements
- SRX220 Services Gateway Compliance Statements for Environmental Requirements
- SRX220 Services Gateway Compliance Statements for Acoustic Noise
- SRX220 Services Gateway Power Guidelines, Requirements, and Specifications
- SRX220 Services Gateway Interface Cable Specifications and Connector Pinouts
- Contacting Customer Support and Returning the SRX220 Services Gateway Hardware
- Index