16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card

The SRX3K-16GE-TX adds 16 ports for standard Ethernet, Fast Ethernet, or Gigabit Ethernet traffic from copper media. The ports utilize RJ-45 connectors. LEDs on the faceplate of the IOC indicate port status and connectivity.

Figure 11 shows the 16-Port Copper 10/100/1000 I/O Card.

Figure 11: 16-Port Copper 10/100/1000 IOC

Image g036031.gif
  • If a CFM slot is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through the device.

  • The ONLINE button on IOC does not perform any function and currently it is not supported.

Table 21 describes the 16-Port Copper 10/100/1000 IOC LEDs.

Table 21: 16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card LED Indicators

Label

Color

Status

Indicated Behavior

SERVICE

Green

On steadily

The IOC is mapped to the Network and Service Processing Card (NSPC) and is available to carry Ethernet traffic.

Amber

On steadily

The IOC is not mapped to the NSPC and is not available to carry Ethernet traffic.

Dark (unlit)

Off

The IOC is administratively disabled but is mapped to the NSPC.

OK/FAIL

Green

On steadily

The IOC is operating normally.

Green

Blinking

The IOC is preparing for an online insertion and removal event:

  • IOC is being Inserted: power up, booting, initialization.
  • IOC is being removed: shut down by chassis management software.

Red

On steadily

The IOC has failed and is not operating normally.

Dark (unlit)

Off

The IOC is offline and can be safely removed.

Related Documentation