SRX1400 Services Gateway Network and Services Processing Card
The Network and Services Processing Card (NSPC) is a double-wide common form-factor module (CFM) card that provides the processing power to run integrated services such as firewall, IPSecurity (IPsec), and intrusion detection and prevention (IDP). All traffic traversing the services gateway is passed to an NSPC to have services processing applied to it. Traffic is intelligently distributed and an NSPC for service processing, including session setup based on policies, fast packet processing for packets that match a session, encryption and decryption, and Internet Key Exchange (IKE) negotiation.
![]() |
|
Figure 8 shows the SRX1400 Services Gateway NSPC.
Figure 8: SRX1400 Services Gateway Network and Services Processing Card

Table 17 describes the NSPC behavior indicated by the LEDs on its front panel.
Table 17: SRX1400 Services Gateway Network and Services Processing Card LED Indicators
Label | Color | Status | Description |
---|---|---|---|
SERVICE | Green | On steadily | The NSPC is running under acceptable load. |
Amber | On steadily | The NSPC is overloaded. | |
Red | On steadily | No service is being provided by the NSPC. | |
Dark (unlit) | Off | The NSPC is not enabled. | |
OK/FAIL | Green | On steadily | The NSPC is operating normally. |
Green | Blinking | The NSPC is preparing for an online insertion and removal event. | |
Red | On steadily | The NSPC has failed and is not operating normally. | |
Dark (unlit) | Off | The NSPC is powered down. |