SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway

You can install either an NSPC, or a combination of SRX3000 Series Services Gateway Network Processing Card (NPC) and Services Processing Card (SPC), on the SRX1400 Services Gateway. You must use a double-wide tray with the combination of NPC and SPC.

To install the NPC and SPC on the SRX1400 Services Gateway, you must order the double-wide tray (SRX1K3K-2CFM-TRAY) to hold two single-wide CFMs (NPC and SPC). Contact your Juniper Networks customer service representative for more information.

The Network Processing Cards (NPCs), Service Processing Cards (SPCs), and I/O Cards (IOCs) are completely interoperable between SRX1400 Services Gateway and SRX3000 Series Services Gateway, and they have the same part numbers.

Table 52 lists the hardware components that are interoperable on the SRX3000 Series Services Gateways and the SRX1400 Services Gateways.

Table 52: SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway

Card

Model Number

Slot on SRX1400 Services Gateway

NPC

SRX3K-NPC

CFM 3

SPC

SRX3K-SPC

CFM 1

16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet IOC

SRX3K-16GE-TX

CFM 2

16-Port SFP Gigabit Ethernet IOC

SRX3K-16GE-SFP

CFM 2

2-Port XFP 10-Gigabit Ethernet IOC

SRX3K-2XGE-XFP

CFM 2

Note: The Routing Engine and power supply units (AC and DC) are not interoperable between the SRX1400 Services Gateway and the SRX3000 and SRX5000 Series Services Gateways.

Note: The NPCs, SPCs, and IOCs are not provided with the SRX1400 Services Gateway. You must order them separately. Contact your Juniper Networks customer service representative for more information.

Related Documentation