16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card

The SRX3K-16GE-TX adds 16 ports for standard Ethernet, Fast Ethernet, or Gigabit Ethernet traffic from copper media. The ports utilize RJ-45 connectors. LEDs on the faceplate of the IOC indicate port status and connectivity.

Figure 12 shows the 16-Port Copper 10/100/1000 I/O Card.

Figure 12: 16-Port Copper 10/100/1000 IOC

If a CFM slot is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through the device.
The ONLINE button on the IOC does not perform any function and is currently not supported.

Table 21 describes the 16-Port Copper 10/100/1000 IOC LEDs.

Table 21: 16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card LED Indicators

Label	Color	Status	Indicated Behavior
SERVICE	Green	On steadily	The IOC is mapped to the Network and Service Processing Card (NSPC) and is available to carry Ethernet traffic.
	Amber	On steadily	The IOC is not mapped to the NSPC and is not available to carry Ethernet traffic.
	Unlit	Off	The IOC is administratively disabled but is mapped to the NSPC.
OK/FAIL	Green	On steadily	The IOC is operating normally.
	Green	Blinking	The IOC is preparing for a hot-swappable event: IOC is being Inserted: power up, booting, initialization. IOC is being removed: shut down by chassis management software.
	Red	On steadily	The IOC has failed and is not operating normally.
	Unlit	Off	The IOC is offline and can be safely removed.

16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card

Related Documentation