Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway
The Network Processing Cards (NPCs), Service Processing Cards (SPCs), and I/O Cards (IOCs) are completely interoperable between SRX1400 Services Gateway and SRX3000 Series Services Gateways, and they have same part numbers.
Table 52 lists the hardware components that are interoperable on the SRX3000 Series Services Gateways and the SRX1400 Services Gateways.
Table 52: SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway
Card | Model Number | Slot on SRX1400 Services Gateway |
|---|---|---|
NPC | SRX3K-NPC | CFM3 |
SPC | SRX3K-SPC | CFM1 |
16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet IOC | SRX3K-16GE-TX | CFM2 |
16-Port SFP Gigabit Ethernet IOC | SRX3K-16GE-SFP | CFM2 |
2-Port XFP 10-Gigabit Ethernet IOC | SRX3K-2XGE-XFP | CFM2 |
 | Note: The Routing Engine and Power Supply Units (AC and DC) are not interoperable between the SRX1400 Services Gateway and the SRX3000 and SRX5000 Series Services Gateway. |
| Note: The NPCs, SPCs, and IOCs are not provided with the SRX1400 Services Gateway. You must order them separately. Contact your Juniper Networks customer service representative for more information. You can either use an NSPC or combination of SRX3000 Series Services Gateway Network Processing Card (NPC) and Services Processing Cards (SPC), with a double wide tray holder on the SRX1400 Services Gateway for the device to operate properly. To install the NPC and SPC on the SRX1400 Services Gateway, you must order the double wide tray holder (SRX1K3K-2CFM-TRAY) to hold two single-wide CFMs (NPC and SPC). Contact your Juniper Networks customer service representative for more information. |
