Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Installation Overview for the SRX1400 Services Gateway
This section provides instructions for installing the SRX1400 Services Gateway in a rack or cabinet. Because of the size and weight of the device—up to 42.5 lb (19.3 kg) (fully loaded chassis) depending on the configuration—we recommend that you install it using a mechanical lift. The SRX1400 Services Gateway is rack-mountable with support for both front-mounting and rear-mounting.
After you have prepared your installation site, you are ready to unpack and install the services gateway. It is important to proceed through the installation process as shown in Table 32.
Table 32: SRX1400 Services Gateway Installation Process
Procedures | For More Information, See: |
|---|---|
Review the safety guidelines | |
Install the services gateway | Installing the SRX1400 Services Gateway in a Rack or Cabinet Manually or Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift |
Connect cables to external devices | Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management or Connecting the SRX1400 Services Gateway to a Management Console or an Auxiliary Device |
Connect the grounding cable | |
Connect the power cables | Connecting the SRX1400 Services Gateway to a DC Power Supply or Connecting the SRX1400 Services Gateway to an AC Power Supply |
Power on the services gateway | |
Perform the initial system startup |
