Maintaining Power Supplies on the SRX1400 Services Gateway

To maintain the power supplies, follow these guidelines:

To check the status of the power supplies, use the show chassis environment pem command. The output is similar to the following:

user@host> show chassis environment
pem

PEM 0 status:
  State                      Online
  Temperature                OK   34 degrees C / 93 degrees F
  AC Input:                  OK   118 Volts
  DC Output           Voltage(V) Current(A)  Power(W)  Load(%)
                          12        11            132      11
PEM 1 status:
  State                      Online
  Temperature                OK   29 degrees C / 84 degrees F
  AC Input:                  OK   119 Volts
  DC Output           Voltage(V) Current(A)  Power(W)  Load(%)
                          12        10            120      10

Make sure that the power and grounding cables are arranged so that they do not obstruct access to other services gateway components.
Routinely check the PWR status LED on the SYSIOC faceplate. If this LED is solid green, the power supplies are functioning normally.
Routinely check the LED on the power supply faceplate. Each power supply faceplate displays a single LED to indicate the status of the power supply. For more information, see SRX1400 Services Gateway AC Power Supply or SRX1400 Services Gateway DC Power Supply.
Periodically inspect the site to ensure that the grounding and power cables connected to the device are securely in place and that there is no moisture accumulating near the device.

Maintaining Power Supplies on the SRX1400 Services Gateway

Related Documentation