Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management

To connect the Routing Engine to a network for out-of-band management:

1. Plug one end of an Ethernet cable with RJ-45 connectors (see Figure 28) into the RE ETHERNET port on the front of the SYSIOC.

   Figure 28: Ethernet Cable Connector

   
2. Plug the other end of the cable into the management device.
3. Proceed with grounding and powering on the device.

Related Documentation

• Connecting the SRX1400 Services Gateway to a Management Console or an Auxiliary Device
• SRX1400 Services Gateway Software Configuration Overview
• Performing Initial Software Configuration on the SRX1400 Services Gateway (CLI Procedure)