Installing the Mounting Hardware for the SRX1400 Services Gateway

The specific mounting hardware used depends on the type of rack you are using. Follow the appropriate steps for your rack to install the mounting hardware.

To install the mounting hardware:

  1. Locate the rack mount brackets in the accessory kit.
  2. Position a mounting bracket on each side of the chassis. You can position the brackets in front-mount or rear-mount position.
  3. Use the screws provided to secure the rack mount brackets to the sides of the chassis as shown in Figure 19.

    Figure 19: Attaching Mounting Bracket to the SRX1400 Services Gateway

    Image g033513.gif

Related Documentation