Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway

To use J-Web to perform basic configuration for the integrated VDSL2 interface and to configure network interfaces for the services gateway:

  1. In J-Web, select Configure>Interfaces.

    The Interfaces page appears and lists the network interfaces present on the services gateway, along with configuration information (if configured).

  2. To configure properties for a network interface, select the interface name (pt-1/0/0), and click Edit.
  3. To use the VDSL2 port, you must assign it to a security zone other than the Null zone. Optionally, you can also assign the port an IP address (for example, 192.168.3.1/24). Enter or select the following settings:
    1. Select Configure>Security>Zones/Screens.
    2. Add or select a security zone other than Null; for example, Trust.
    3. For host inbound traffic, set the following:
      • System Services=Allow All.
      • Protocols=Allow All.
    4. Click OK to save changes, and click Commit to apply the configuration and other pending changes.
  4. To use the VDSL2 port (VDSL/ADSL-POTS or VDSL/ADSL-ISDN), you must also set security policies. Select the following settings:
    1. Select Configure>Security>Apply Policy.
    2. Set Policy Action: Default Policy Action=Permit-All.
    3. Click OK to save changes, and click Commit to apply the configuration and other pending changes (if any).

For more information, in the J-Web user interface, select Configure>Interfaces, and click Help.

To use the CLI to perform basic configuration of the integrated VDSL2 interface and to configure network interfaces for the services gateway:

For more details, see the Junos OS Interfaces Configuration Guide for Security Devices PDF Document.

Related Documentation