SRX110 Services Gateway Front Panel and Back Panel Views with 3G and Integrated VDSL2

This topic includes the following sections:

SRX110 Services Gateway Front Panel View with 3G and Integrated VDSL2

Figure 3 and Figure 4 show the front panels of the SRX110 Services Gateway models SRX110H-VA and SRX110H-VB.

Figure 3: SRX110 Services Gateway Front Panel (SRX110H-VA)

SRX110 Services Gateway
Front Panel (SRX110H-VA)

Figure 4: SRX110 Services Gateway Front Panel (SRX110H-VB)

SRX110 Services Gateway
Front Panel (SRX110H-VB)

Table 6 lists the front panel components of the SRX110 Services Gateway.

Table 6: SRX110 Services Gateway Front Panel Components

Number

Component

1

Power button

2

LEDs: Alarm, Status, Power, and 3G

3

Universal Serial Bus (USB) port

4

Fast Ethernet ports

5

Console port

6

Reset Config button

7

LEDs: SYNC and TX/RX

8

  • For SRX110H-VA—VDSL/ADSL-POTS
  • For SRX110H-VB—VDSL/ADSL-ISDN

For more information on the front panel components, see the following topics:

SRX110 Services Gateway Back Panel View

Figure 5 shows the back panel of the SRX110 Services Gateway.

Figure 5: SRX110 Services Gateway Back Panel

SRX110 Services Gateway
Back Panel

Table 7 lists the back panel components of the SRX110 Services Gateway.

Table 7: SRX110 Services Gateway Back Panel Components

Number

Component

1

Cable tie holder

2

3G-WAN USB port

3

Lock

4

Grounding point

5

CompactFlash card

6

Power supply unit

7

Cable tie holder

  • If there is any problem with the CompactFlash card, you must return the services gateway for repair or replacement. For this, you need to contact Juniper Networks Technical Assistance Center (JTAC).
  • The cable tie holder provides support for holding the power cord to the power supply point.
  • The lock allows you to lock and secure the device to the installation site.

Related Documentation