8-Port Gigabit Ethernet SFP XPIM Components

The 8-Port Gigabit Ethernet small form-factor pluggable Gigabit-Backplane Physical Interface Module (SFP XPIM) contains the components listed in Table 54.

Table 54: 8-Port Gigabit Ethernet SFP XPIM Components

Component

Location

Description

ONLINE/OFFLINE button

Right side of the XPIM

Use the ONLINE/OFFLINE button to gracefully shut down the XPIM. Press down and hold the button for 4 to 5 seconds; then release. The XPIM gracefully shuts down and turns off the power supply units (PSUs).

To power up the XPIM (if the Services and Routing Engine [SRE] is off), press and hold the ONLINE/OFFLINE button for 4 to 5 seconds.

TX and RX coaxial connectors

Middle/right of the XPIM

Dual female 75-ohm BNC coaxial connectors: TX (transmit) and RX (receive).

Two captive screws

One on each side of the XPIM

Use the captive screws to hold the XPIM in place.

Related Documentation