8-Port Gigabit Ethernet SFP XPIM Key Features

The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has the following key features:

• 8 triple-speed (10/100/1000 Mbps) Ethernet ports, double-high card
• PoE not supported
• PCI-Express interface for control and management
• I2C interface for module monitor and identification
• Maximum module power of 40.0 W without PoE
• JTAG support for boundary scan test

Note: We strongly recommend that you use transceivers purchased from Juniper Networks. We cannot guarantee correct operation if other transceivers are used. The transceiver type can be different in each port, as long as that port supports that type.

Related Documentation

• 8-Port Gigabit Ethernet SFP XPIM Overview
• 8-Port Gigabit Ethernet SFP XPIM Hardware Specifications
• 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications
• 8-Port Gigabit Ethernet SFP XPIM Supported Modules
• 8-Port Gigabit Ethernet SFP XPIM LEDs
• 8-Port Gigabit Ethernet SFP XPIM Components
• 8-Port Gigabit Ethernet SFP XPIM Basic Configuration