1-Port Clear Channel DS3/E3 GPIM Basic Configuration

To enable the 1-Port Clear Channel DS3/E3 GPIM installed on the SRX Series Services Gateway, you must configure the basic settings for the PIM. You can perform the configuration tasks for this using either the J-Web interface or the CLI.

• Using the CLI

Using the CLI

To perform basic configuration for the 1-Port Clear Channel DS3/E3 GPIM and to configure network interfaces for the services gateway with the CLI:

• Verify that the 1-Port Clear Channel DS3/E3 GPIM is installed on the services gateway:

  show chassis hardware

  root@srx650r03> show chassis hardware 
  Hardware inventory:
  Item             Version  Part number  Serial number     Description
  Chassis                                AJ2210AA0064      SRX650
  Midplane         REV 09   710-023875   AABJ4077         
  System IO        REV 08   710-023209   AABK2897          SRXSME System IO
  Routing Engine   REV 18   750-023223   AABJ8853          RE-SRXSME-SRE6
  FPC 0                                                    FPC
    PIC 0                                                  4x GE Base PIC
  FPC 2            REV 03   750-023873   TV4286            FPC
  FPC 5            REV 10   750-023810   AABE1433          FPC
  FPC 6            REV 10   750-023808   AAAJ9355          FPC
    PIC 0                                                  4x CT1E1 gPIM
  FPC 7            REV 10   750-023808   AAAV0753          FPC
  FPC 8            REV 09   750-023810   AAAC6572          FPC
    PIC 0                                                  1x CLR CH T3/E3
  Power Supply 0   Rev 03   740-024283   UE05105           PS 645W AC
  

• Verify the FPC status of the interface:

  show chassis fpc

  root@srx650r03> show chassis fpc               
                       Temp  CPU Utilization (%)   Memory    Utilization (%)
  Slot State            (C)  Total  Interrupt      DRAM (MB) Heap     Buffer
    0  Online          -------------------- CPU less FPC --------------------
    1  Empty           --------------------  Not Usable  --------------------
    2  Offline         ---------- FPC configured offline ----------
    3  Empty           --------------------  Not Usable  --------------------
    4  Empty           --------------------  Not Usable  --------------------
    5  Offline         ---------- FPC configured offline ----------
    6  Online                    0          0       128        14         41
    7  Offline         ---------- FPC configured offline ----------
    8  Online                    0          0       128        14         41
  

• Verify the PIC status:

  show chassis fpc pic-status

  root@srx650r03> show chassis fpc pic-status    
  Slot 0   Online       FPC
    PIC 0  Online       4x GE Base PIC
  Slot 2   Offline      FPC
  Slot 5   Offline      FPC
  Slot 6   Online       FPC
    PIC 0  Online       4x CT1E1 gPIM
  Slot 7   Offline      FPC
  Slot 8   Online       FPC
    PIC 0  Online       1x CLR CH T3/E3
  

• Set the DS3/E3 port mode; for example, DS3 mode:

  set chassis fpc <fpc no> pic 0 port 0 framing t3/e3

  Note: By default, the PIC comes up in DS3 mode and the t3-x/y/z physical interface is created. The port mode chosen for t3 is IFDP_T3, and the port mode chosen for e3 is IFDP_E3.

• Assign the port an IP address:

  set interfaces t3-3/0/0 unit 0 family inet address interface address/destination prefix

• Assign MTU values:

  set interfaces t3-3/0/0 unit 0 family inet mtu mtu values

• Enable/disable unframed DS3 mode; for example, unframed:

  set interfaces t3-3/0/0 t3-options unframed

• Set encapsulation:

  set interfaces t3-3/0/0 encapsulation cisco-hdlc

• Add or select a security zone; for example, trust:

  set security zones security-zone trust interfaces t3-3/0/0.0 host-inbound-traffic system-services all

• Add or select security zones for host inbound traffic:

  set security zones security-zone trust interfaces t3-3/0/0.0 host-inbound-traffic protocols all

• Set security policies:

  set security policies default-policy permit-all

Related Documentation

• 1-Port Clear Channel DS3/E3 GPIM Overview
• 1-Port Clear Channel DS3/E3 GPIM Hardware Specifications
• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications
• 1-Port Clear Channel DS3/E3 GPIM Supported Standards
• 1-Port Clear Channel DS3/E3 GPIM Key Features
• 1-Port Clear Channel DS3/E3 GPIM LEDs
• 1-Port Clear Channel DS3/E3 GPIM Components
• 1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics