2-Port 10-Gigabit Ethernet XPIM Components

The 2-Port 10 Gigabit Ethernet XPIM contains the components listed in Table 48.

Table 48: 2-Port 10 Gigabit Ethernet XPIM Components

Component

Location

Description

XPIM ONLINE/OFFLINE button

Both the SRX550 and the SRX650 Services Gateways support hot-swappable functionality for GPIMs.

Right side of the XPIM

Use the XPIM ONLINE/OFFLINE button to gracefully shut down the XPIM.

Two groups of ports labeled 0 and 1, where each group contains 1 copper port and 1 fiber port.

Note: By default, all ports are flow control enabled, and support link speed of 10 G in full-duplex mode.

The 10 G fiber port does not support autonegotiation.

Use the fiber ports to connect various SFP+ transceivers for fiber cable connections. See Table 49 for supported SFP+ transceivers.

Middle of the XPIM

  • Copper ports support link speeds of 10/100/1000 Mbps/10 G in full-duplex and half-duplex modes.
  • Fiber ports support link speeds of 1000 Mbps/10 G in full-duplex mode.

    Note: The 1 G fiber port configuration is supported starting with Junos OS Release 10.2R2.

  • Copper ports (for 10 G) use a CAT-6a or CAT-7 cable connector.
  • Copper ports support autonegotiation; whereas fiber ports do not support autonegotiation.

    Note: The 10 G fiber port does not support autonegotiation.

  • All ports support flow control and can be configured in loopback mode for testing purposes.

Captive screws

One on each side of the XPIM

Use the captive screws to hold the XPIM in place.

You can customize the Ethernet interface type by using different SFP+ transceivers. Table 49 shows the available SFP+ transceivers.

Note: We strongly recommend the use of Juniper Networks SFP/SFP+ and XFP transceivers. We cannot guarantee correct operation if other transceivers are used. The transceiver type can be different in each port, as long as a supported part number is used.

Table 49: 2-Port 10- Gigabit Ethernet XPIM SFP+ Transceivers

Product Number

Interface Type

Connector

SFPP-10GE-SR

10GBase-SR Ethernet optical transceiver SFP, 26 m reach

LC

SFPP-10GE-LR

10GBase-LR Ethernet optical transceiver SFP, 10 Km reach

LC

SFPP-10GE-ER

10GBase-ER Ethernet optical transceiver SFP, 40 Km reach

LC

SFPP-10GE-LRM

10GBase-LRM Ethernet optical transceiver SFP, 220 m reach

LC

Copper Twin-AX 1m

10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach

Cable connector with 1 m cable length

Copper Twin-AX 3m

10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach

Cable connector with 3 m cable length

Copper Twin-AX 5m

10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach

Cable connector with 5 m cable length

Copper Twin-AX 7m

10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach

Cable connector with 7 m cable length

Related Documentation