2-Port 10-Gigabit Ethernet XPIM LEDs
The 2-Port 10 Gigabit Ethernet XPIM has the LEDs listed in Table 47.
Table 47: 2-Port 10-Gigabit Ethernet XPIM LED States
LED | Color | State | Description |
---|---|---|---|
STATUS | Green | On | XPIM is online and functioning normally. |
Yellow | On | XPIM is starting up, running diagnostics, or shutting down. | |
Red | On | XPIM has failed. | |
Off | XPIM has no power and can be pulled out safely. | ||
LINK/ACT | Link Green | On | Port is online. |
Off | Port is offline. | ||
Activity Green | Blinking | Port is sending data. Note: For fiber ports, the Activity LED does not blink when the port is only receiving data. | |
Off | Port might be on but is not receiving or sending data. | ||
LINK/ACT Note: Each port has two LEDs; one on either side of the port. The left LED is activity and the right is link. | Link Green | On | Port is online. |
Off | Port is offline. | ||
Activity Green | Blinking | Port is sending data. | |
Off | Port might be on but is not receiving or sending data. |
Figure 28 shows the 2-Port 10-Gigabit Ethernet XPIM.
Figure 28: 2-Port 10-Gigabit Ethernet XPIM
