24-Port Gigabit Ethernet XPIM Overview
The 24-Port Gigabit Ethernet XPIM is a double-high, double-wide LAN switch Gigabit-Backplane Physical Interface Module (GPIM) that uses two standard slots vertically and two standard slots horizontally. It is available with or without Power over Ethernet (PoE) support. The PoE GPIMs provide ports that supply electric power over the same ports that are used to connect network devices. For more information about PoE, see Power over Ethernet Support on SRX Series Services Gateway Interfaces.
The 24-Port XPIM must be installed in specific GPIM slot groupings as shown in Table 58.
Table 58: Slot Groups for the 24-Port Gigabit Ethernet XPIM
Device | Slot Groups for the 24-Port Gigabit Ethernet XPIM |
---|---|
SRX550 Services Gateway | Top four standard slots (slots 5, 6, 7, and 8) |
SRX650 Services Gateway | Bottom four standard slots (slots 1, 2, 3, and 4) and top four standard slots (slots 5, 6, 7, and 8) |
The center GPIM slot bracket must be removed before installing a double-high, double-wide GPIM. See Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway for details.
Note: Both the SRX550 and the SRX650 Services Gateways support hot-swappable functionality for GPIMs. |
Figure 34 shows the 24-Port Gigabit Ethernet XPIM, and Figure 35 shows the 24-Port Gigabit Ethernet XPIM with PoE.
Figure 34: 24-Port Gigabit Ethernet XPIM
Figure 35: 24-Port Gigabit Ethernet XPIM with PoE
Related Documentation
- 24-Port Gigabit Ethernet XPIM Key Features
- 24-Port Gigabit Ethernet XPIM Hardware Specifications
- 24-Port Gigabit Ethernet XPIM LEDs
- 24-Port Gigabit Ethernet XPIM Components
- 24-Port Gigabit Ethernet XPIM Basic Configuration
- Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway