Required Tools and Parts for Replacing a Gigabit-Backplane Physical Interface Module

The following tools and parts are required for replacing a Gigabit-Backplane Physical Interface Module (GPIM) on the SRX Series Services Gateway:

• Electrostatic bag or antistatic mat, for each component
• Electrostatic discharge (ESD) grounding wrist strap
• Flat-blade (–) screwdriver, approximately 1/8 in. (3 mm)
• Phillips (+) screwdrivers, numbers 1 and 2
• Blank panels (if no component will be installed)

Related Documentation

• Removing a Blank Gigabit-Backplane Physical Interface Module Faceplate from the SRX Series Services Gateway
• Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway
• Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway
• Removing a Gigabit-Backplane Physical Interface Module from the SRX Series Services Gateway