RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical Interface Module

The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) uses an RJ-48 cable, which is not supplied with the Mini-PIM.

Caution: To maintain agency approvals, use only a properly constructed, shielded cable.

Table 76 gives RJ-48 connector to RJ-48 connector (straight) pinouts.

Table 76: RJ-48 Connector to RJ-48 Connector (Straight) Pinouts

RJ-48 Pin (on 1-Port T1/E1 Mini-PIM)

RJ-48 Pin (Data Numbering Form)

Signal

1

1

RX, Ring, –

2

2

RX, Tip, +

4

4

TX, Ring, –

5

5

TX, Tip, +

3

3

Shield/Return/Ground

6

6

Shield/Return/Ground

7

No connect

No connect

8

No connect

No connect

Related Documentation