Table of Contents

About This Guide
Objectives
Audience
Documentation Conventions
SRX Series Documentation and Release Notes
Obtaining Documentation
Documentation Feedback
Requesting Technical Support
SRX Series Services Gateway Interface Overview
Introduction to the SRX Series Services Gateway Interfaces
SRX Series Services Gateway Interface Overview
SRX Series Services Gateway Mini-Physical Interface Modules Overview
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview
Supported SRX Series Services Gateway Interfaces
SRX Series Services Gateway Interfaces Models and Compatibility
MTU Default and Maximum Values for Physical Interface Modules
SRX Series Services Gateway Interfaces Power and Heat Requirements
Power over Ethernet Support on SRX Series Services Gateway Interfaces
SRX Series Services Gateways Interfaces Port Naming Conventions
Installing and Removing Interfaces on the SRX Series Services Gateway
Replacing a Mini-Physical Interface Module in the SRX Series Services Gateway
Required Tools and Parts for Replacing a Mini-Physical Interface Module
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX Series Services Gateway
Installing a Mini-Physical Interface Module in the SRX Series Services Gateway
Removing a Mini-Physical Interface Module from the SRX Series Services Gateway
Replacing a Gigabit-Backplane Physical Interface Module in the SRX Series Services Gateway
Required Tools and Parts for Replacing a Gigabit-Backplane Physical Interface Module
Preventing Electrostatic Discharge Damage to the SRX Series Services Gateway
Removing a Blank Gigabit-Backplane Physical Interface Module Faceplate from the SRX Series Services Gateway
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway
Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway
Removing a Gigabit-Backplane Physical Interface Module from the SRX Series Services Gateway
Mini-Physical Interface Modules Supported on the SRX Series Services Gateway
1-Port SFP Mini-Physical Interface Module
1-Port SFP Mini-Physical Interface Module Overview
1-Port SFP Mini-Physical Interface Module Hardware Specifications
1-Port SFP Mini-Physical Interface Module Network Interface Specifications
Supported Modules for the 1-Port SFP Mini-Physical Interface Module
Key Features of the 1-Port SFP Mini-Physical Interface Module
1-Port SFP Mini-Physical Interface Module LEDs
Basic Configuration of the 1-Port SFP Mini-Physical Interface Module
Using J-Web
Using the CLI
2-Port FXS/2-Port FXO Mini-Physical Interface Module
2-Port FXS/2-Port FXO Mini-Physical Interface Module Overview
Key Features of the 2-Port FXS/2-Port FXO Mini-Physical Interface Module
2-Port FXS/2-Port FXO Mini-Physical Interface Module Hardware Specifications
2-Port FXS/2-Port FXO Mini-Physical Interface Module LEDs
Basic Configuration of the 2-Port FXS/2-Port FXO Mini-Physical Interface Module
4-Port FXO Mini-Physical Interface Module
4-Port FXO Mini-Physical Interface Module Overview
4-Port FXO Mini-Physical Interface Module Hardware Specifications
Key Features of the 4-Port FXO Mini-Physical Interface Module
4-Port FXO Mini-Physical Interface Module LEDs
Basic Configuration of the 4-Port FXO Mini-Physical Interface Module
4-Port FXS Mini-Physical Interface Module
4-Port FXS Mini-Physical Interface Module Overview
4-Port FXS Mini-Physical Interface Module Hardware Specifications
Key Features of the 4-Port FXS Mini-Physical Interface Module
4-Port FXS Mini-Physical Interface Module LEDs
Basic Configuration of the 4-Port FXS Mini-Physical Interface Module
ADSL2+ Mini-Physical Interface Module
ADSL2+ Mini-Physical Interface Module Overview
ADSL2+ Mini-Physical Interface Module Hardware Specifications
ADSL2+ Mini-Physical Interface Module Network Interface Specifications
Supported Standards on the ADSL2+ Mini-Physical Interface Module
Key Features of the ADSL2+ Mini-Physical Interface Module
ADSL2+ Mini-Physical Interface Module LEDs
Supported Loopback Diagnostics on the ADSL2+ Mini-Physical Interface Module
Basic Configuration of the ADSL2+ Mini-Physical Interface Module
Using J-Web
Using the CLI
DOCSIS Mini-Physical Interface Module
DOCSIS Mini-Physical Interface Module Overview
DOCSIS Mini-Physical Interface Module Key Features
DOCSIS Mini-Physical Interface Module Supported Standards
DOCSIS Mini-Physical Interface Module Network Interface Specifications
DOCSIS Mini-Physical Interface Module Hardware Specifications
DOCSIS Mini-Physical Interface Module LEDs
Basic Configuration of the DOCSIS Mini-Physical Interface Module
Using J-Web
Using the CLI
G.SHDSL 8-Wire Mini-Physical Interface Module
G.SHDSL Mini-Physical Interface Module Overview
G.SHDSL Mini-Physical Interface Module Supported Standards
G.SHDSL Mini-Physical Interface Module Operating Modes
G.SHDSL Mini-Physical Interface Module Key Features
G.SHDSL Mini-Physical Interface Module Hardware Specifications
G.SHDSL Mini-Physical Interface Module LEDs
Basic Configuration of G.SHDSL Mini-Physical Interface Modules
Using J-Web
Using the CLI
Serial Mini-Physical Interface Module
Serial Mini-Physical Interface Module Overview
Serial Mini-Physical Interface Module Hardware Specifications
Supported Standards on the Serial Mini-Physical Interface Module
Key Features of the Serial Mini-Physical Interface Module
Serial Mini-Physical Interface Module LEDs
Serial Mini-Physical Interface Module Interface Cables
Basic Configuration of the Serial Mini-Physical Interface Module
Using J-Web
Using the CLI
T1/E1 Mini-Physical Interface Module
T1/E1 Mini-Physical Interface Module Overview
T1/E1 Mini-Physical Interface Module Hardware Specifications
T1/E1 Mini-Physical Interface Module Network Interface Specifications
Supported Standards on the T1/E1 Mini-Physical Interface Module
Key Features of the T1/E1 Mini-Physical Interface Module
T1/E1 Mini-Physical Interface Module LEDs
Supported Loopback Diagnostics on the T1/E1 Mini-Physical Interface Module
Basic Configuration of the T1/E1 Mini-Physical Interface Module
Using J-Web
Using the CLI
VDSL2 (Annex A) Mini-Physical Interface Module
VDSL2 Mini-Physical Interface Module Overview
VDSL2 Mini-Physical Interface Module Key Features
VDSL2 Mini-Physical Interface Module Supported Profiles
VDSL2 Mini-Physical Interface Module Hardware Specifications
VDSL2 Mini-Physical Interface Module LEDs
Basic Configuration of the VDSL2 Annex A Mini-Physical Interface Module
Using J-Web
Using the CLI
Gigabit-Backplane Physical Interface Modules Supported on the SRX Series Services Gateway
2-Port 10 Gigabit Ethernet XPIM
2-Port 10 Gigabit Ethernet XPIM Overview
Key Features of the 2-Port 10 Gigabit Ethernet XPIM
2-Port 10 Gigabit Ethernet XPIM Hardware Specifications
2-Port 10 Gigabit Ethernet XPIM LEDs
2-Port 10 Gigabit Ethernet XPIM Components
Basic Configuration of the 2-Port 10 Gigabit Ethernet XPIM
Using J-Web
Using the Point and Click CLI to Set Interface Mode and Speed Options
Using the CLI
16-Port Gigabit Ethernet XPIM
16-Port Gigabit Ethernet XPIM Overview
Key Features of the 16-Port Gigabit Ethernet XPIM
16-Port Gigabit Ethernet XPIM Hardware Specifications
16-Port Gigabit Ethernet XPIM LEDs
16-Port Gigabit Ethernet XPIM Components
Basic Configuration of the 16-Port Gigabit Ethernet XPIM
Using J-Web
Using the CLI
24-Port Gigabit Ethernet XPIM
24-Port Gigabit Ethernet XPIM Overview
Key Features of the 24-Port Gigabit Ethernet XPIM
24-Port Gigabit Ethernet XPIM Hardware Specifications
24-Port Gigabit Ethernet XPIM LEDs
24-Port Gigabit Ethernet XPIM Components
Basic Configuration of the 24-Port Gigabit Ethernet XPIM
Using J-Web
Using the CLI
Dual CT1/E1 GPIM
Dual CT1/E1 GPIM Overview
Key Features of the Dual CT1/E1 GPIM
Dual CT1/E1 GPIM Network Interface Specifications
Dual CT1/E1 GPIM Hardware Specifications
Dual CT1/E1 GPIM LEDs
Dual CT1/E1 GPIM Components
Basic Configuration of the Dual CT1/E1 GPIM
Using J-Web
Using the CLI to Configure the CT1 Interface
Using the CLI to Configure the CE1 Interface
Quad CT1/E1 GPIM
Quad CT1/E1 GPIM Overview
Key Features of the Quad CT1/E1 GPIM
Quad CT1/E1 GPIM Network Interface Specifications
Quad CT1/E1 GPIM Hardware Specifications
Quad CT1/E1 GPIM LEDs
Quad CT1/E1 GPIM Components
Basic Configuration of the Quad CT1/E1 GPIM
Using J-Web
Using the CLI to Configure the CT1 Interface
Using the CLI to Configure the CE1 Interface
Appendixes
SRX Series Services Gateways Interface Cable Specifications and Connector Pinouts
T1/E1 Mini-Physical Interface Module Cable Specifications
RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the T1/E1 Mini-Physical Interface Module
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the T1/E1 Mini-Physical Interface Module
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the T1/E1 Mini-Physical Interface Module
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the T1/E1 Mini-Physical Interface Module
ADSL2+ Mini-Physical Interface Module Cable Specifications
RJ-11 Connector Pinouts for the ADSL2+ Mini-Physical Interface Module
FXO/FXS Mini-Physical Interface Module Cable Specifications
RJ-11 Connector Pinouts for the FXO/FXS Mini-Physical Interface Module
Serial Mini-Physical Interface Module Cable Specifications
EIA-530A DCE Cable Pinouts for the Serial Mini-Physical Interface Module
EIA-530A DTE Cable Pinouts for the Serial Mini-Physical Interface Module
RS-232 DCE Cable Pinouts for the Serial Mini-Physical Interface Module
RS-232 DTE Cable Pinouts for the Serial Mini-Physical Interface Module
RS-422/449 (EIA-449) DCE Cable Pinouts for the Serial Mini-Physical Interface Module
RS-422/449 (EIA-449) DTE Cable Pinouts for the Serial Mini-Physical Interface Module
V.35 DCE Cable Pinouts for the Serial Mini-Physical Interface Module
V.35 DTE Cable Pinouts for the Serial Mini-Physical Interface Module
X.21 DCE Cable Pinouts for the Serial Mini-Physical Interface Module
X.21 DTE Cable Pinouts for the Serial Mini-Physical Interface Module
G.SHDSL Mini-Physical Interface Module Cable Specifications
G.SHDSL 8-Wire Mini-PIM Wire Modes
RJ-45 Cable (RJ-45 to Four RJ-11 Connectors) Pin Assignment
RJ-45 Cable (RJ-45 to Two RJ-11 Connectors) Pin Assignment
Standard RJ-45 Cable Pin Assignment
VDSL2 Mini-Physical Interface Module Cable Specifications
Contacting Customer Support and Returning SRX Series Services Gateway Hardware Components
Return Procedure for SRX Series Services Gateway Hardware Components
Locating the SRX Series Services Gateway Hardware Component Mini-PIM or GPIM Serial Number Label
SRX Series Services Gateway Mini-PIM Serial Number Label
SRX Series Services Gateway GPIM Serial Number Label
Information You Might Need to Supply to JTAC
Contacting Customer Support
Packing the Hardware Components for Shipment
Index
Index