Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

SRX5K-MPC3-40G10G Specifications

The SRX5K-MPC3-40G10G (IOC3) is an interface card that provides 10 Gigabit Ethernet and 40 Gigabit Ethernet interfaces, with a Packet Forwarding Engine that provides a 240 Gbps line rate. This interface card is supported on SRX5400, SRX5600, and SRX5800 Services Gateways. See Figure 19.

Note: These cards do not support plug-in Modular Interface Cards (MICs).

All ports on the interface card have dual-color LEDs for reporting link status.

The interface card also supports hot-pluggable optical modules.

You can install the interface card in any of the slots that are not reserved for Switch Control Boards (SCBs).

Figure 19: SRX5K-MPC3-40G10G

SRX5K-MPC3-40G10G

Note: In SRX5800 Services Gateways, you cannot install the interface card in slots 0 and 11.

If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through the services gateway.

Description

  • Fixed-configuration MPC with six 40-Gigabit Ethernet ports and twenty-four 10-Gigabit Ethernet ports
  • Maximum throughput: 240 Gbps
  • Maximum configurable MTU: 9192 bytes

Software release

Junos OS Release 15.1X49-D10 and later

Cables and connectors

Fiber-optic 10-Gigabit DAC transceivers:

  • SRX-SFP-10GE-DAC-1M
  • SRX-SFP-10GE-DAC-3M
  • EX-SFP-10GE-DAC-5M
  • EX-SFP-10GE-DAC-7M

Fiber-optic 40-Gigabit transceivers:

  • JNP-QSFP-40G-LX4
  • SRX-QSFP-40G-LR4
  • SRX-QSFP-40G-SR4

Fiber-optic 10-Gigabit SFP+ transceivers:

  • SRX-SFP-10GE-SR
  • SFPP-10GE-ER-XT
  • SFPP-10GE-ER
  • SRX-SFPP-10G-SR-ET
  • SRX-SFPP-10G-LR
  • SRX-SFP-10GE-LR

Power requirements

Typical: 9.68 A @ 48 V (460 W)

At different temperatures:

  • 55° C: 607 W
  • 40° C: 541 W
  • 25° C: 511 W

Weight

21 lb (9.52 kg)

Hardware features

  • Line-rate throughput of up to 240 Gbps
  • Supports up to 32,000 queues per-slot
  • LAN-PHY mode at 10.3125 Gbps on a per-port basis
  • The ports are labeled as:
    • 10-Gigabit Ethernet ports: 0/0 through 0/11 and 1/0 through 1/11
    • 40-Gigabit Ethernet ports: 2/0 through 2/2 and 3/0 through 3/2

Software features

  • Optical diagnostics and related alarms
  • Two packet-forwarding engines, PFE0 and PFE1. PFE0 hosts PIC0 and PIC2. PFE1 hosts PIC1 and PIC3.
  • Configurable LAN-PHY mode options per 10-Gigabit Ethernet port
  • Intelligent oversubscription services

Note: A maximum of two PICs can be powered on at any one time (PIC0 or PIC2, and PIC1 or PIC3). The other PICs must be powered off.

LEDs

OK/FAIL LED, one bicolor:

  • Solid green—MPC is functioning normally.
  • Blinking green—MPC is transitioning online or offline.
  • Red—MPC has failed.

10-Gigabit Ethernet LINK LED, one green per port:

  • Green—Link is up.
  • Off—Link is down or disabled.

40-Gigabit Ethernet LINK LED, one bicolor per port:

  • Green—Link is up.
  • Amber—Link is disabled.
  • Off—Link is down.

Serial Number Location

The serial number label is located as shown in Figure 20.

Figure 20: SRX5K-MPC3-40G10G Serial Number Label

SRX5K-MPC3-40G10G Serial Number Label

Related Documentation

Modified: 2017-04-20