Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Switch Control Board SRX5K-SCBE Specifications

Each SRX5K-SCBE consists of the following components:

  • I2C bus logic for low-level communication with each component
  • Component redundancy circuitry
  • Control Board/Routing Engine mastership mechanism
  • Gigabit Ethernet switch that is connected to the embedded CPU complex on all components
  • Switch fabric to provide the switching functions for the MPCs
  • 1000BASE-T Ethernet controller to provide a 1-Gbps Ethernet link between the Routing Engines
  • Power circuits for the Routing Engine and the SRX5K-SCBE
  • LEDs—Provides status of the SRX5K-SCBE and clocking interface
Description
  • SRX5K-SCBE with slot for Routing Engine
  • Maximum throughput: 120 Gbps per slot
Software release

Junos OS Release 12.1X47-D15 and later

Cables and connectors

Slot for Routing Engine

Controls

None

Supported slots
  • SRX5400–Only bottom slot 0
  • SRX5600–Only bottom slots 0 and 1
  • SRX5800–Only center slots 0, 1, and 2/6
Power requirement
  • 160 W at 131º F (55º C)
  • 130 W at 104º F (40º C)
  • 120 W at 77º F (25º C)
Weight

9.6 lb (4.4 kg) with Routing Engine

Serial number location

The serial number label is located as shown in Figure 33.

Figure 33: SRX5K-SCBE Serial Number Label

SRX5K-SCBE Serial Number Label

SRX5K-SCBE LEDs

Table 2 describes the SRX5K-SCBE LEDs and their states.

Table 2: SRX5K-SCBE LEDs

LabelColorStateDescription

FABRIC ACTIVE

Green

On steadily

Fabric is in active mode.

FABRIC ONLY

Green

On steadily

SRX5K-SCBE operates in fabric-only mode.

None

Off

SRX5K-SCBE operates in fabric/control board mode.

OK/FAIL

Green

On steadily

SRX5K-SCBE is online.

Red

On steadily

SRX5K-SCBE has failed.

None

Off

SRX5K-SCBE is offline.

Related Documentation

Modified: 2017-04-20