Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Mounting the PTX10016 Using a Mechanical Lift

Because of the router's size and weight, the PTX10016 can safely be installed only by using a mechanical lift.

Caution: Do not install line cards in the chassis until after you mount the chassis securely on a rack or cabinet.

Caution: Before front-mounting the router on a rack or cabinet, have a qualified technician verify that the rack or cabinet is strong enough to support the router's weight and is adequately supported at the installation site.

Ensure that you have the following parts and tools available to install the router:

  • A mechanical lift rated for 1000 lbs. (453.6 kg)
  • 12 mounting screws appropriate for your rack
  • A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack-mounting screws

Caution: If you are installing more than one router in a rack or cabinet, install the first router at the bottom of the rack.

To install the router using a mechanical lift (see Figure 6):

  1. Ensure that the rack or cabinet is placed in its permanent location and is secured to the building. Ensure that the installation site allows adequate clearance for both airflow and maintenance. For details, see Cooling and Airflow Requirements.
  2. Load the router onto the lift, making sure it rests securely on the lift platform.

    Figure 6: Loading the PTX10016 into a Rack By Using a Mechanical Lift

    Loading the PTX10016 into
a Rack By Using a Mechanical Lift
  3. Using the lift, align the router in front of the rack, centering it in front of the mounting brackets.
  4. Lift the chassis approximately 0.75 in. (1.9 cm) above the surface of the mounting brackets. Align the chassis as close as possible to the mounting brackets.
  5. Carefully slide the chassis onto the adjustable mounting brackets until the front-mounting brackets attached to the chassis contact the rack rails. The mounting brackets ensure that the holes in the front-mounting brackets align with the holes in the rack rails. See Figure 7.

    Figure 7: Attaching Front-Mounting Brackets

    Attaching Front-Mounting
  6. Move the lift away from the rack.
  7. Install a mounting screw into each of the open front-mounting holes aligned with the rack, starting from the bottom.
  8. Visually inspect the alignment of the router. If the router is installed properly in the rack, all the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and the router is level.
  9. After ensuring that the router is aligned properly, tighten the screws.

Modified: 2017-12-18