Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Establish the Connection

  1. Connect the device to the Internet Service Provider (ISP) by using the following step:

    Note: For information on interface mapping, see Table 2 and Table 3.

    Connect one of the WAN ports such as heth-0-4 or heth-0-5 to the ISP. The device is assigned an IP address by the ISP through DHCP.

    Figure 4: Connecting the Interfaces on an NFX150-C-S1 Device

    Connecting the Interfaces
on an NFX150-C-S1 Device

    Optionally, you can obtain a SIM card from the ISP and connect the device through LTE. For more information about SIM card activation, see the Getting Started with NFX150 available at:

    https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/

  2. Connect the laptop to one of the front panel LAN ports such as heth-0-0, heth-0-1, heth-0-2, or heth-0-3. The laptop is assigned an IP address by the DHCP server running on the interface.
  3. Open a browser on your laptop, navigate to https://www.juniper.net, and verify your connectivity.

Modified: 2018-05-03