Navigation
Back up to About Overview
[+] Expand All
[-] Collapse All
Download This Guide
Access the Device
- Ensure that the NFX150 device is powered on.
- Connect to the console port:
- Plug one end of the Ethernet cable into the console port on your NFX150 device.
- Connect the other end of the Ethernet cable to the RJ-45—to—DB-9 serial port adapter shipped with your device.
- Connect the RJ-45—to—DB-9 serial port adapter
to the serial port on the management device. Use the following values
to configure the serial port:
Baud rate—9600; Parity—N; Data bits—8; Stop bits—1; Flow control—None.
Note: Alternately, you can use the USB cable to connect to the mini-USB console port on the device. To use the mini-USB console port, you must download the USB driver from the following page and install it on the management device:
- Use any terminal emulation program, such as HyperTerminal, to connect to the device console. The CLI displays a login prompt.
- Log in as root and enter the
password juniper123. If the software completes
booting before you connect to the console, you might need to press
the Enter key for the prompt to appear:
login: rootpassword: juniper123 - Start the CLI:
root@:~ # cliroot@> - Enter configuration mode:
root@> configure[edit]root@# - Change the password for the root administration user account:
[edit]root@# set system root-authentication plain-text-passwordNew password: passwordRetype new password: password - Enable SSH service for the root user:
[edit]root@# set system services ssh root-login allow - (Optional) Enable WAN connection for devices connected
on LAN:
[edit]root@# set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server dns-server-ip - Commit the configuration:
[edit]root@# commit
