Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Related Documentation

    Connect the Router to a Network for Out-of-Band Management

    1. Turn off the power to the management device.
    2. Plug one end of the Ethernet cable into the ETHERNET port on the Routing Engine. (Figure 5 shows the connector. Figure 6 shows the port.)
    3. Plug the other end of the cable into the network device.

    Figure 5: Ethernet Cable Connector

    Ethernet Cable
Connector

    Figure 6: Ethernet Port

    Ethernet Port

    Modified: 2016-04-11