Software release

• JUNOS 6.0 and later

Description

• Passive traffic monitoring or flow collection services
• Power requirement: 0.4 A @ 48 V (19 W)
• Monitors IPv4 packets
• Support for collecting and exporting cflowd records

Hardware features

• Monitors up to 400,000 packets per second
• Support for MTUs up to 4474 bytes for SONET interfaces

Software features

For more information about the software features for services PICs, see the JUNOS Services Interfaces Configuration Guide.

• Load distribution across multiple PICs
• Active monitoring cflowd version 5 support
• Provides start and end times of each export
• Encapsulations:
  • Multilink Frame Relay (MLFR)
  • Multilink Point-to-Point Protocol (MLPP)
• Supports firewall filtering and filter-based forwarding (FBF)

Note: Flow collection services are supported in JUNOS 6.2 and later.

Note: This PIC does not support graceful Routing Engine switchover.

Cables and connectors

• None

LEDs

Status LED, one tricolor:

• Off—PIC is offline and it is safe to remove it from the chassis.
• Green—PIC is operating normally.
• Amber—PIC is initializing.
• Red—PIC has an error or failure and no further harm can be done by removing it from the chassis.

Application LED, one bicolor:

• Off—Flow collector is not running.
• Green—Flow collector is running under acceptable load.
• Amber—Flow collector is overloaded.