[ Contents] [ Prev] [ Next] [ Report an Error]

Adaptive Services PIC (M40e Router)

Image g003068.gif

Software release

  • JUNOS 6.0 and later

Description

  • Supports tunnel services. This feature is included with the PIC and does not require an individual license.
  • Individual licenses must be purchased for additional services such as Network Address Translation (NAT), stateful firewall, intrusion detection services (IDS), IPSec, J-Flow accounting, and voice services. For information about which services are supported by PIC and platform type, see the JUNOS Services Interfaces Configuration Guide.
  • Power requirement: 0.4 A @ 48 V (19 W)

Hardware features

  • Throughput speeds up to 800 Mbps of unidirectional traffic or 400 Mbps of bidirectional traffic, determined by packet size
  • Active monitoring on any interface up to 250,000 packets per second
  • Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces

Software features

For a list of the software features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.

Depending on your JUNOS release and individual licenses, software features for this PIC can include:

  • Stateful firewall with packet inspection
    • Detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks
  • NAT for IP addresses
  • Port Address Translation (PAT) for port numbers
  • J-Flow accounting exports cflowd version 5 and version 8 records
  • Tunnel services:
    • IP-IP unicast tunneling
    • GRE unicast tunneling—supports GRE fragmentation
    • PIM sparse mode unicast tunneling
    • Virtual loopback tunnel interface for VRF table lookup
  • IPSec encryption
  • Voice services:
    • Compressed Real-Time Transport Protocol (CRTP)
    • Compressed User Datagram Protocol (CUDP)
  • Encapsulations:
    • High-Level Data Link Control (HDLC)
    • Point-to-Point Protocol (PPP)

LEDs

Status LED, one tricolor:

  • Off—PIC is offline and it is safe to remove it from the chassis.
  • Green—PIC is operating normally.
  • Amber—PIC is initializing.
  • Red—PIC has an error or failure and no further harm can be done by removing it from the chassis.

Application LED, one tricolor:

  • Off—Service is not running.
  • Green—Service is running under acceptable load.
  • Amber—Service is overloaded.

Related Topics


[ Contents] [ Prev] [ Next] [ Report an Error]