[ Contents] [ Prev] [ Next] [ Report an Error]

Step 3: Install the Cable Management System

The cable management system organizes and supports the PIC cables to prevent damage.

To install the cable management system:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Locate the cable management racks and appropriate screws in the accessory box.
  3. Slide the cable management rack into the slots at the front of the chassis.
  4. Use a number 2 Phillips screwdriver to tighten the screws that secure the cable management system to the chassis.

Figure 3: Cable Management System

Image g003338.gif

[ Contents] [ Prev] [ Next] [ Report an Error]