[ Contents] [ Prev] [ Next] [ Report an Error]

Safety Warnings

Warning: See installation instructions before connecting the router. This is a summary of safety warnings. For a complete list of warnings for this router, including translations, see the M10i Internet Router Hardware Guide at https://www.juniper.net/techpubs/.

Warning: The intra-building port(s) of the router is suitable for connection to intrabuilding or unexposed wiring or cabling only. The intra-building port(s) of the router MUST NOT be metallically connected to interfaces that connect to the OSP or its wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition of Primary Protectors is not sufficient protection in order to connect these interfaces metallically to OSP wiring.

Caution: Before removing or installing components of a router, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the router.

Caution: An external Surge Protective Device (SPD) should be used at the AC input of the router.

[ Contents] [ Prev] [ Next] [ Report an Error]