Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Related Documentation

  • Line Card LED in an EX9200 Switch
  • Craft Interface in an EX9200 Switch

Network Port LEDs on Line Cards in an EX9200 Switch

Each SFP, SFP+, QSFP+, CFP, and RJ-45 port on the faceplate of line cards has an LED, the Link/Activity LED, which indicates the link status and activity on the port. Each RJ-45 port has an additional LED, the Status LED, which indicates the status of the port parameters.

Table 4 describes the Link/Activity LED.

LED

Color

State and Description

Link/Activity

Green

  • On steadily—The port and the link are active, but there is no link activity.
  • Blinking—The port and the link are active, and there is link activity.
  • Off—The port is not active.

The Status LED in 10/100/1000BASE-T RJ-45 Ethernet network port indicates the status of one of the three port parameters—administrative status, speed, and duplex mode status.

Table 5 describes the Status LED.

Table 5: Network Port LEDs on Line Cards in an EX9200 Switch—Status LED

LED

LCD Indicator

State, Color, and Description

Status

LED: ADM

Indicates the administrative status (enabled or disabled). The status indicators are:

  • Green—Administrative status enabled.
  • Yellow—The port is down.
  • Unlit—Administrative status disabled.

LED: SPD

Indicates the speed. The speed indicators are different in the line cards.

  • Unlit—10 Mbps
  • Green—Blinking—100 Mbps
  • Green—On steadily—1000 Mbps

LED: DPX

Indicates the duplex mode. The status indicators are:

  • Green—Port is set to full-duplex mode.
  • Unlit—Port is not set to full-duplex mode.

Related Documentation

  • Line Card LED in an EX9200 Switch
  • Craft Interface in an EX9200 Switch

Modified: 2016-08-25