Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Part 2: Install a Fan Module

 Note

The fan module slots are on the rear panel of the switches.

To install a fan module (see Figure 3).

Figure 3: Installing a Fan Module in EX4650 Switches
Installing a Fan Module in EX4650 Switches
  1. Remove the fan module from its bag.
  2. Hold the handle of the fan module with one hand and support the weight of the module with the other hand. Place the fan module in the fan module slot on the rear panel of the switch and slide it in until it is fully seated.
  3. Tighten the screws on the faceplate of the fan module by using a screwdriver.