Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Part 1: Install a Power Supply

 Note

Each power supply must be connected to a dedicated power source outlet. The power supply slots are on the rear panel.

To install a power supply (see Figure 1 and Figure 2):

Figure 1: Installing an AC Power Supply in EX4650 Switches
Installing an AC Power
Supply in EX4650 Switches
Figure 2: Installing a DC Power Supply in EX4650 Switches
Installing a DC Power
Supply in EX4650 Switches
  1. If the power supply slot has a cover panel on it, use your fingers to hold and gently pull the cover panel outward to remove the cover panel. Save the cover panel for later use.
  2. Taking care not to touch power supply pins, leads, or solder connections, remove the power supply from the bag.
  3. Using both hands, place the power supply in the power supply slot on the rear panel of the switch and slide it in until it is fully seated and the ejector lever fits into place.